5

7

4

9

3

1

2

8

10

6

the 508MT2 machining centre

Direct drive of the X, Y and Z axes by linear motors

 

30,000 rpm powered spindle with HSK-E40, HSK-A40 or Capto C4 interface (optional 42,000 rpm milling)

 

A-axis spindle/divider, turning up to 8,000 rpm, 36 mm bar stock diameter (optional bar stock diameter 42, 51 or 65 mm)

 

 

Fanuc 31i-B5 control console, 15’’ screen

1

2

3

4

Tool magazine with 48-position quick tool changer (72-position magazine optional)

 

Back machining turret with 3 usable positions (counter-spindle, vice and tailstock), fitted on the U axis, 360 mm travel

 

Various feeding systems for short or long bars stock (can be adapted on the left side of the machine)

 

Various automation / robotization systems, loading or unloading workpieces or pallets (can be adapted on the right side of the machine)

5

6

7

8

Swarf and coolant collection tray (recovery of precious metals or conveyor optional)

 

A simple and economical 0°-90° pickup unit with 1 usable position (counter-spindle, vice or gripper) can be utilized as an option, instead of the back turret with 3 usable positions. Alternatively, it is also possible to equip the machine   with a turning turret with 8 fixed posts and a rotating tailstock centre for front and back machining, and with an integrated pickup vice for parts pickup. The turning turret is fitted on a Z2 and X2 carriage.

 

 

9

10

WILLEMIN-MACODEL SA I SWITZERLAND I ROUTE DE LA COMMUNANCE 59 I CH-2800 DELEMONT I TEL. +41 (0)32 427 03 03 I FAX +41 (0)32 426 55 30